Skip navigation
BelSU DSpace logo

Please use this identifier to cite or link to this item: http://dspace.bsu.edu.ru/handle/123456789/41568
Title: Study of the structure formation during compression for selecting multiaxial deformation conditions for an Mg-Ca Alloy
Authors: Yurchenko, N. Yu.
Stepanov, N. D.
Salishchev, G. A.
Martynenko, N. S.
Lukyanova, E. A.
Keywords: technique
metal science
magnesium alloy
compression
multiaxial deformation
mechanical properties
grain size
recrystallization
Issue Date: 2018
Citation: Study of the structure formation during compression for selecting multiaxial deformation conditions for an Mg-Ca Alloy / Yurchenko N.Yu. [et al.] // Russian Metallurgy (Metally). - 2018. - Vol.2018, №11.-P. 1046-1058. - Doi: 10.1134/S0036029518110137.
Abstract: The structure homogeneity of the Mg-0.8% Ca alloy is shown to increase with temperature during uniaxial compression. Plastic deformation localizes in narrow and wide deformation bands at 250-350°C. A small number of regions with recrystallized grains is observed only after deformation at 400°C. A relatively homogeneous recrystallized structure with an average grain size of about 20 μm forms after uniaxial compression at t = 450°C
URI: http://dspace.bsu.edu.ru/handle/123456789/41568
Appears in Collections:Статьи из периодических изданий и сборников (на иностранных языках) = Articles from periodicals and collections (in foreign languages)

Files in This Item:
File Description SizeFormat 
Yurchenko_Study of the Structure.pdf2.76 MBAdobe PDFView/Open
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.