|Title:||Effect of multidirectional forging and equal channel angular pressing on ultrafine grain formation in a Cu-Cr-Zr alloy|
warm multidirectional forging
|Citation:||Shakhova, I. Effect of multidirectional forging and equal channel angular pressing on ultrafine grain formation in a Cu-Cr-Zr alloy / I. Shakhova, A. Belyakov, R. Kaibyshev // IOP Conference Series: Materials Science and Engineering. - 2014. - №63.-Art. 012097.|
|Abstract:||The microstructure evolution was investigated in a Cu-0.3%Cr -0.5%Zr alloy subjected to large plastic deformation at temperature of 400° C. Two methods of large plastic deformation, i.e., equal channel ang ular pressing (ECAP) and multidirectional forging (MDF) were used. The large plastic deformations resulted in the development of new ultrafine grains. The formation of new ultrafine grains occurred as a result of continuous reaction, i.e., progressive incr ease in the misorientations of deformation subboundaries. The faster kinetics of microstructure evolution was observed during MDF as compared to ECAP. The MDF to a total strain of 4 resulted in the formation of uniform ultrafine grained structure, while ECAP to the same strain led to the heterogeneous microstructure consisting of new ultrafine grains and coarse remnants of original grains . Corresponding area fractions of ultrafine grains comprised 0.23 and 0.59 in the samples subjected to ECAP and MDF, respectively|
|Appears in Collections:||Статьи из периодических изданий и сборников (на иностранных языках) = Articles from periodicals and collections (in foreign languages)|
|Shakhova_ Effect_of_multidirectional_2014.pdf||6.87 MB||Adobe PDF||View/Open|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.