Skip navigation
BelSU DSpace logo

Please use this identifier to cite or link to this item: http://dspace.bsu.edu.ru/handle/123456789/20450
Title: Grain refinement in a Cu-Cr-Zr alloy during multidirectional forging
Authors: Shakhova, I.
Yanushkevich, Z.
Fedorova, I.
Belyakov, A.
Kaibyshev, R.
Keywords: technique
metal science
alloys
Cu-Cr-Zr alloy
large strain deformation
grain refinement
precipitation
EBSD
plastic deformation
Issue Date: 2014
Citation: Grain refinement in a Cu-Cr-Zr alloy during multidirectional forging / I. Shakhova [и др.] // Materials Science and Engineering A . - 2014. - №606.-P. 380-389.
Abstract: Structural changes during plastic deformation were studied in a Cu-0.3%Cr-0.5%Zr alloy subjected to multidirectional forging up to a total strain of 4 at the temperatures of 300 K and 673 K. The deformation behavior was characterized by a rapid increase in the flow stress at an early deformation followed by a steady-state flow at large strain. The development of the new ultrafine grains resulted from the progressive increase in the misorientations of the strain-induced low-angle boundaries, which evolve into high-angle boundaries with increasing cumulative strain through a strain-induced continuous reaction that is quite similar to continuous dynamic recrystallization
URI: http://dspace.bsu.edu.ru/handle/123456789/20450
Appears in Collections:Статьи из периодических изданий и сборников (на иностранных языках) = Articles from periodicals and collections (in foreign languages)

Files in This Item:
File Description SizeFormat 
Shakhova_Grain_refinement_14.pdf7.44 MBAdobe PDFView/Open
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.