|Title:||Σ3 CSL boundary distributions in an austenitic stainless steel subjected to multidirectional forging followed by annealing|
austenitic stainless steels
|Citation:||Σ3 CSL boundary distributions in an austenitic stainless steel subjected to multidirectional forging followed by annealing / M. Tikhonova [и др.] // Philosophical Magazine. - 2014. - Vol. 94, №36.-P. 4181-4196.|
|Abstract:||The effect of processing and annealing temperatures on the grain boundary characters in the ultrafine-grained structure of a 304-type austenitic stainless steel was studied. An S304H steel was subjected to multidirectional forging (MDF) at 500-800°C to total strains of ~4, followed by annealing at 800-1,000°C for 30 min. The MDF resulted in the formation of ultrafine-grained microstructures with mean grain sizes of 0.28-0.85 μm depending on the processing temperature. The annealing behaviour of the ultrafine-grained steel was characterized by the development of continuous post-dynamic recrystallization including a rapid recovery followed by a gradual grain growth. The post-dynamically recrystallized grain size depended on both the deformation temperature and the annealing temperature. The recrystallization kinetics was reduced with an increase in the temperature of the preceding deformation|
|Appears in Collections:||Статьи из периодических изданий и сборников (на иностранных языках)|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.