| DC Field | Value | Language |
|---|
| dc.contributor.author | Gazizov, M. | - |
| dc.contributor.author | Calin Daniel Marioara | - |
| dc.contributor.author | Jesper Friis | - |
| dc.contributor.author | Sigurd Wenner | - |
| dc.contributor.author | Kaibyshev, R. | - |
| dc.date.accessioned | 2021-06-24T14:20:43Z | - |
| dc.date.available | 2021-06-24T14:20:43Z | - |
| dc.date.issued | 2019 | - |
| dc.identifier.citation | Precipitation behavior in an Al-Cu-Mg-Si alloy during ageing / M. Gazizov [et al.] // Materials Science & Engineering A. - 2019. - Vol.767.-Art. 138369. - Doi: https://doi.org/10.1016/j.msea.2019.138369. | ru |
| dc.identifier.uri | http://dspace.bsu.edu.ru/handle/123456789/42364 | - |
| dc.description.abstract | The precipitation behavior and aging response of an Al-4.9Cu-0.74Mg-0.51Si-0.48Mn-0.1Cr-0.08Ti-0.02Fe (wt.%) alloy was examined in detail after aging at 170 °C with different dwell times up to 96 h. Deformation by 3%-stretching prior to aging was used to investigate the effect of dislocations on phase and hardness evolution and compared with the undeformed material. The small pre-deformation led to a slight decrease of peak strength due to reduced homogenous nucleation. Strong interaction between different phases caused the formation of hybrid structures both in the undeformed bulk areas and on dislocations | ru |
| dc.language.iso | en | ru |
| dc.subject | technique | ru |
| dc.subject | metal science | ru |
| dc.subject | alloys | ru |
| dc.subject | aluminium alloys | ru |
| dc.subject | electron microscopy | ru |
| dc.subject | phase transformations | ru |
| dc.subject | hardness | ru |
| dc.subject | modeling/simulations | ru |
| dc.title | Precipitation behavior in an Al-Cu-Mg-Si alloy during ageing | ru |
| dc.type | Article | ru |
| Appears in Collections: | Статьи из периодических изданий и сборников (на иностранных языках) = Articles from periodicals and collections (in foreign languages)
|
